- Mounts flat to the door.
- Gray rigid PVC extrusion.
- Surface mount retainer can be screwed to most doors allowing the use of most single Dart style gaskets.
- Retainer will add 9/32" thickness to the gasket area and will in most cases require hinges to be shimmed or a higher offset hinge.
- You must have 1-1/4" reveal around the outer edge of the door (where the existing gasket sits) to insure that the retainer will lie flat.
- Screws can be countersunk into the retaining groove for mounting. The gasket dart may be notched at the screw heads to allow proper fit.
- To save on shipping ups we advise cutting retainer close to length needed.
Unit of Measure
Width A |
N/A 1-1/8 in |
Thickness B |
N/A 9/32 in |
Length |
N/A 96 in |
Reveal Size |
N/A 1-1/4 in |