Skip To Content

Catalog

Request Information
Unit of Measure
Items
Miscellaneous Gaskets and Retainers

Closed Cell Foam Gasket
Miscellaneous Gaskets and Retainers

Closed Cell Foam Gasket
Retrofit Snap-In Gasket Retainer

Retrofit Snap-In Gasket Retainer
Replacement Snap-In Gasket Retainer

Replacement Snap-In Gasket Retainer
23-35105-1

Replacement Gasket Retainer for Victory Units
Description N/A
  • Adhesive backed.
  • Sponge rubber with closed cells.
 		N/A
  • Adhesive backed.
  • Sponge rubber with closed cells.
 		N/A
  • Mounts flat to the door.
  • Gray rigid PVC extrusion.
  • Surface mount retainer can be screwed to most doors allowing the use of most single Dart style gaskets.
  • Retainer will add 9/32" thickness to the gasket area and will in most cases require hinges to be shimmed or a higher offset hinge.
  • You must have 1-1/4" reveal around the outer edge of the door (where the existing gasket sits) to insure that the retainer will lie flat.
  • Screws can be countersunk into the retaining groove for mounting. The gasket dart may be notched at the screw heads to allow proper fit.
  • To save on shipping ups we advise cutting retainer close to length needed.
 		N/A
  • Replacement gasket retainer available in 8' lengths.
  • Easy replacement.
  • Gray rigid PVC extrusion.
  • Used in new doors or replaces existing broken retainer (Doors should be foam-filled).
 		N/A
Width A N/A 1 in N/A 1 in N/A 1-1/8 in N/A 7/8 in N/A
Thickness B N/A 1/2 in N/A 1/4 in N/A 9/32 in N/A 3/8 in N/A
Length N/A N/A N/A 96 in N/A 96 in N/A
Color N/A N/A N/A N/A Gray N/A
Reveal Size N/A N/A N/A 1-1/4 in N/A N/A
Material N/A Sponge Rubber N/A Sponge Rubber N/A N/A N/A
Victory Part # N/A N/A N/A N/A N/A 50264603 - Gasket Retainer